Shearing Machines

Billet Shearing Machine

Billet Shearing Machine
These are heavy duty shears required tor material preparation for either Rolling or Forging. The feedstock available in the form of billets or slabs is cut in cold condition, depending upon end application.

M.S. Plate fabricated construction completely machined, bored with triple reduction. Shafts, special steel Blades. Flywheel etc

We manufacture MS / SS / Alloy Billet Shearing Machine upto 225 x 225 mm capacity.

Cold Shearing Machine

Cold Shearing Machine
Cold Shearing machines are used to cut the finished product into desired lengths.

We manufacture crop shearing machine for ail kinds of Bars, rounds and structural products like Angle, I/H beam. Flat. U Channel etc.

Special Features:-

Alligator Shearing Machine

Alligator Shearing Machine
Is named because of its resemblance to crocodile and the two blades move like jaws of the reptile. Selection of gear material for pinions is done as per types of operation viz. light, medium or heavy.

Steel Fabricated stress relived body construction Horizontal or Vertical scissors used to cut cracked ends or fishtails while rolling. Machine mounted on bearings including. Shafts. Input Pinion. Output Gear. Flywheel- cum-pulley. Blades

The sizes refer to mild steel only. The requirement of shear shall vary if alloy steels of Different grades are to be sheared. Sizes to be cold sheared should not be more than fifty percent of the hot cutting sizes.

Flying Shear Machine

Flying Shear Machine
Flying Shear Machine is used to cut the material of various sizes, in different lengths of Shearing Machines with flying arm effects. It is installed after the Shearing Machines and before the cooling bed. It drives through Programmer Logic Controller (PLC) system. DC or AC Variable Motors. It is used in high speed mills.

We manufacture flying shear with a capacity of TMT Bar sizes 8 mm -40 mm.

Rotary Shearing Machine (Fix & Swivel)

Rotary Shearing Machine (Fix & Swivel)
Used In pairs between Roughing and Intermediate Finishing Stands to crop front and back ends in TMT Bat/Wire Rod Mills.

Special Features:-

Hot End Shearing Machine

Hot End Shearing Machine
Hoi Saws are used in Hot Rolling to cut desired length and as well as to trim front & Rear End. These shears are capable of cutting section size ranging from 160 to 600mm {Beam, Channel, Angle) and as well as Square. Racks of 40 to 250mm. The Hot Saw presently is of two types Pendulum Swinging type and the other is of horizontal shift type.

Snap Shearing Machine

Snap Shearing Machine
We manufacture high quality Snap shearing Machines which are stable and robust in design. Our range of machines ensure durability, safety and excellent performance. Our snap shearing machines are used between two stands to cut roll mills. These machines have completely have features automatic lubrication, which helps in providing trouble free service. The welded steel frames of these machines ensure durability and reliability. These corrosion resistant machines are sturdy and have excellent loading capacity. They require low maintenance and can be availed at most competitive prices.

Plate/Scrap Shearing Machine

Plate/Scrap Shearing Machine
These are generally heavy duly type machines, used for cutting re-rollable scrap (plates. Rails, beams, channels, rounds, angles, squares, etc. in cold condition.

These are usually used by scrap mills to prepare rolling stock in suitable shape & size tor Re-rolling.

Very useful in induction melting Furnace, scrap processing yard to cut Pieces of pipe, angles, channels, sheets, flats and round etc.

We manufacture scrap shearing machine with to minimum capacity ol 18 mm to maximum of 75 mm (cold metal)

Pinch Roll

Pinch Roll
The basic function of pinch roll is to push the material towards a particular direction. It does not cause any kind of physical change in the material, and is usually used to move the material over a distance.

It is installed at various places in a rolling mill such as between the roughing mill and the intermediate mill, before and after the TMT Quenching Box to maintain the speed and tension of Bars. It is driven through AC/DC Motor and consists of 2 Hi Gear Box. solid rolls with Cardon Shaft.

A cantilever type pinch roll is one of the pinch roll manufactured by us.
X
Provide Us More Details
Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for Shearing Machines ?

    country-ico

    We will contact you soon !

    Raman Mittal

    (Managing Director)

    SMT Machines (India) Limited

    Mandi Gobindgarh, Punjab, India

    More Categories

    View All Categories »
    Send SMS
    Contact Us